Enabling By Other Command System - Hiltron security TM Serie Manuel D'utilisation

Serie TM / Serie PROTEC burglary central unit - User's manual
4.3

Enabling by other command system

4.3.1 Enabling
All the SKI connector for the electronic key, the PXR reader for the proximity key and the
KBC, KBM and KBT keypads have two LEDs, one green and one red, indicating the central unit
status (see table beside).
Turn the key switch
Verify that the red LED is turned off.
If it's turned on, it's necessary to close the opened doors or windows relative to the zone
that is signalled opened in the central unit.
Insert the electronic key, or approach the proximity key to the reader, or digit the code on
the keypad.
The green LED turns off indicating that the system is enabled.
4.3.2 Disabling
Turn the key switch
Verify that the red LED is turned off.
If it's turned on, it's necessary to close the opened doors or windows relative to the zone
that is signalled opened in the central unit.
Insert the electronic key, or approach the proximity key to the reader, or digit the code on
the keypad.
The green LED turns off indicating that the system is enabled.
GREEN
LED
GREEN
BOTH
30
in the "ON" position.
1
in the "ON" position.
1
RED
LED
System DISABLED
ON
System
disabled
LED
RED Opened
zone/s
LED
FLASH OFF
System
disabled
Excluded zone
Closed
zones
Exiting
time
security
System ENABLED
ON FLASH
Alarm
memory
OFF
System
enabled
Closed
zones