Installation; General Warnings; Power Supply - Hiltron security TM Serie Manuel D'utilisation

security
2

Installation

2.1

General warnings

Not to install centers it them in places exposed to extreme temperatures or the inclemencies.
For a solid and reliable implantation, he is indispensable to make sure that the superficial ones of the
wall are flat.
To fix centers it them to a height that allows an easy access to the frontal panel.
Centers is protect they against the manomissioni, but the installation in a protected premises and
eventually in the zone of cover of a volumetric detector is one additional protection.
The connections to morsettiere go carry out to you after the assembly of the equipment.
The connections go execute norm CEI 79-3 second "particular Norms for the systems antieffrazione,
antiintrusione, burglar alarm and antiaggression".
2.2

Power supply

It 's important to know that the entire system is powered exclusively by the 12V 7,5Ah lead
battery inside of the burglary central unit; the lead battery is constantly in charge by the power
supplier/battery connected to the 230V~ main power supply.
TM series central unit/ PROTEC series central unit
WARNING!
The main power supply 230V~ has to be connected to the power supplier/battery charger
by two 1,5mm² double-isolation wires coming from a sectioning switch(i.e. a magneto-
thermic protection switch) used exclusively for the burglary central unit. Inside of the
central unit positioning orderly the two wires, locking them by wrappers
Switch
230V~
50Hz
main
power
supply
When the installation is finished, it needs to connect the red/black conductors equipped
with faston coming from the power supplier to the battery. Be careful about connection polarity
(Red=positive [+] of the battery; Black=negative [-] of the battery), so that no cause great
damages to the connected devices.
TM series central unit PROTEC series central unit
Installation
Switch
230V~
50Hz
main
power
supply
21