Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
•
In the KALORIK Home app, press the "+" symbol in the top right corner
or "Add Device" in the center.
•
Select "Small Home Appliances", then choose the "Robot Vacuum"
category. Follow the instructions to input your WiFi information and
connect the app to your WiFi network.
There are 2 ways to connect your robot vacuum to the KALORIK Home
app:
EZ Mode (recommended): Uses your home WiFi network to
‒
communicate between your phone and the robot vacuum
AP Mode: Uses the robot vacuum's built in WiFi to
‒
communicate between your phone and the robot vacuum.
•
Once the KALORIK Home app is connected to your WiFi, click on the
upper right corner to select between "EZ Mode" or "AP Mode". Click the
small circle in front of "Confirm indicator rapidly blinking", then click
"Next" to proceed to the next step.
To connect in EZ Mode:
•
After selecting "EZ Mode" in the KALORIK Home APP, press and hold the
AUTO button on top of the robot vacuum. The indicator light will rapidly
flash purple, indicating the robot vacuum is in EZ Mode.
•
Once the indicator light begins to flash, press the "Next" button. The
app interface will display "Adding device..." as the device connects.
•
Once successful, the indicator light on the robot vacuum will be steady
blue light and the app will read "Added successfully".
To connect in AP Mode:
•
After selecting "AP Mode" in the KALORIK Home APP, press and hold
the AUTO button on top of the robot vacuum. The indicator light will
rapidly flash purple. Release the AUTO button and press again. The
indicator light will flash slowly, indicating the robot vacuum is in AP
Mode.
•
Once the indicator light begins to flash, press the "Next" button.
www.KALORIK.com
8
RVC 47730 BK - 200605
Publicité
Table des Matières
