Kalorik RVC 47730 BK Mode D'emploi page 6

ASSEMBLY
• Insert the side brushes into the vacuum. Please make sure the "L" and
"R" signs on the side brushes correspond to the position "L" and "R" at
the bottom of the machine respectively.
• Place the charging base on a hard, level surface and against a wall.
• Remove objects within 3 ft. / 1 m of the left and right side and within 6
ft. / 2 m of the front of the charging base.
• Connect the round connector of the adapter into the power socket on
the charging base and the other end into a wall outlet.
• Press the AUTO button on top of the vacuum to turn the unit on.
Alternatively, you can use the KALORIK Home app, Alexa or Google
Home to turn on the vacuum.
NOTE:
Install the charging base in a location that the vacuum can easily
‒
access. It is recommended to place the charging base against a
wall, and on a hard-level surface rather than on rugs or carpets.
Always keep the charging base plugged in, otherwise the vacuum
‒
will not automatically return to it.
Charging the Vacuum
The vacuum has a pre-installed rechargeable battery that must be fully
charged (approximately 4-6 hours) before use. The vacuum returns to the
charging base at the end of a cleaning cycle or when its battery is running
low.
www.KALORIK.com
6
RVC 47730 BK - 200605