Kalorik RVC 47730 BK Mode D'emploi page 11

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Smart Cleaning
Pressing the AUTO button on the vacuum or the "A" icon labeled "Smart" in
the KALORIK Home App causes the robot vacuum to start automatically
cleaning.
Manual Control
Press the "Manual" icon in the KALORIK Home app to control the robot
vacuum using directional buttons.
Spiral Mode
The vacuum moves in an outward spiral, cleaning the floor in expanding
circles. Place the unit by the area you wish to power clean and use the
KALORIK Home app to activate. When complete, the machine will return to
the auto sweeping mode.
Wall Follow Mode
In Wall Follow mode, the vacuum follows the wall while avoiding obstacles
to ensure the edge is cleaned thoroughly. Use the KALORIK Home app to
activate. The mode remains on until the user changes to another mode.
NOTE: Pressing the "Switch" button in the KALORIK Home app will turn the
robot vacuum off and on in any of the modes.
Adhesion settings
Toggling the adhesion settings changes between the two speed settings:
"Strong" and "Normal" modes. The Strong mode operates at a higher
speed setting with stronger suction power while the Normal mode operates
at a lower speed, using less energy. The adhesion setting can be changed
during any of the other operating functions using the settings in the
KALORIK Home app.
Using the Ion Function
The vacuum comes with an Ionic Air Purifier function that generates
negative ions which magnetically attract pollutants to remove them from
the air you breath. This function can be turned on or off through the settings
in the KALORIK Home app and be used simultaneously with any other
mode. The indicator light on the robot vacuum will turn purple when this
function is activated.
www.KALORIK.com
RVC 47730 BK - 200605
11

Publicité

Table des Matières
loading

Table des Matières