Editions; Language; Station.type; Busy.time - Urmet BiBus II 1072/17 Mode D'emploi

The main menu will appear on the display when
programming.mode.is.accessed:.
Main.Menu
Edition.
Main.Menu

Language.

Main.Menu
C.Module.Type. . . .
Main.Menu
Cal.Module.n°. . . .
Main.Menu

BUSY.TIME. .

Main.Menu
Door.op..time. .
Main.Menu
Lock.rel..codes. . . .
Main.Menu
Type.of.code..
Main.Menu

Codes/Names. . . .

Main.Menu
Association. .
Main.Menu
Mod. Password
DS107-035
. . . .
↓
. . . .
↓↑
↓↑
↓↑
. . .
↓↑
. . .
↓↑
↓↑
. . .
↓↑
↓↑
. . .
↓↑
↓↑
Main.Menu
Switchb. call
Press. . and. . to. scroll. the. menu.. Press.
confirm once the required menu is reached.
Note:. The module will check for other devices
programmed with the same number (ID) in the
system when accessing programming mode
and during programming. The following error
message will appear if other modules with
the same ID are fitted (which will certainly be
the case of a system with more than one call
station):
EXISTING
CALL.MODULE.N°
Edition
The module can be configured as 1st edition or 2nd
edition.device..The module must be programmed
as 1st edition if there is even only one 1st edition
device in the system (when replacing parts in
old systems). The device must be programmed
as 2nd edition when all the devices in the system
are 2nd edition.
The following message will appear on the display:
Edition:.II.ED
<I ED> <II ED>
Press. . and. . to. select. and. press.
The system will automatically go back to the main
menu after a confirmation tone.
Language
The following message will appear on the display:
==. Language.. . ==
Italiano.
Press. .and. .to.select.and.press.
The system will automatically go back to the main
menu after a confirmation tone.
Station type
The module can be configured as a main station or
as.a.secondary.station..A.secondary.module.can.be.
used.to.send.calls.to.internal.stations.in.the.riser.but.
cannot be used to call the switchboard.
↑
to confirm.
. . . .
↓
to confirm.
. to.
1