Maintenance And Inspection List - SCANMASKIN 32 WORLD Serie Manuel

SCANMASKIN 32 WORLD SERIES
5.3

Maintenance and inspection list

Daily
12 hours after ser-
vice
Every 250 hours
www.scanmaskin.com
 Inspect the wheels
 Inspect the grinding heads
 Look for any other damage
 Check bolts on the grinding heads
 Add grease for the main radial seal.
This is done with a grease gun and the grease
nipple is located at the lower end of the ma-
chine house.
Remove the cover that protects the grease nip-
ple and pump 3 pumps.
Use regular grease type NLGI 2.
 Check the spring steel disc on each grinding
head for cracks (560116)
Replace if damaged.
ENGLISH
95