Personnel Qualification; Safety Regarding Operation Of Machine - SCANMASKIN 32 WORLD Serie Manuel

To perform maintenance work correctly it is imperative to be equipped with the proper
tools for the task in question.
Repairs may only be made by Scanmaskin Sweden AB certified service technicians.
Some grinding work may generate sparks under certain circumstances. Personnel working
with the machine must therefore be aware of the risk of fire and how to handle a fire situa-
tion properly.
Do not use the machine in areas with highly flammable and/or explosive materials.
2.4

Personnel qualification

Fundamental duties:
• Work on the machine may only be undertaken by trained personnel.
• Specify clearly the responsibilities of personnel for operation, setting up, servicing and
maintenance work!
• Make sure that only authorized personnel operate or work on the machine!
• Define responsibilities of the machine operator, with regard to traffic safety regulations, and
inform him not to take instructions from third parties who may not be complying with the lo-
cal safety requirements.
• Personnel, who are being trained to operate equipment, may only use the machine under
constant supervision of an experienced person!
• Work on electrical equipment may only be undertaken by a skilled electrician or by trained
persons under the supervision of a skilled electrician, as well as in accordance with the local
electrical engineering regulations.
2.5

Safety regarding operation of machine

Do not allow any method of working that impairs safety!
Recognized official procedures have to be used to ensure the machine is operated
in safe and best conditions.
Only operate the machine when all safety devices and related safety equipment are pres-
ent and operational!
Check the machine visually for any damage and defects at least once a day.
In the event of operational malfunction, the machine must be shut down immediately and
secured!
80
www.scanmaskin.com