Geberit Aquaclean Mera Comfort WC Instructions De Montage page 45

8
Test the <user profile> buttons 1–4. Perform
tests as follows: start shower procedure.
Adjust spray arm position. Press user profile
button.
1
2
3
4
Result
The spray arm moves back to the factory
setting position.
All buttons are assigned a user profile.
B1238-002 © 01-2016
966.729.00.0 (03)
Resetting the storage water heater
Prerequisite
The status LED on the lateral control panel flashes
red.
If the storage or transport temperature
exceeds 45 °C, the thermal cut-out will be
tripped.
1
Remove front cladding.
T 20
2
Reset the thermal cut-out of the storage
water heater.
2
1
45
EN