Installing The Dicing Kit - KitchenAid 5KFP1318 Serie Manuel D'utilisation Et D'entretien

PRODUCT ASSEMBLY

INSTALLING THE DICING KIT

1
With the Work Bowl removed from the
Base, place Dicing Kit Base, Blade (text
side up) , and Cover in the Work Bowl.
3
Place the Work Bowl Cover on the Work
Bowl. Take out small and/or medium
Feed Tube. Insert food to dice.
PRODUCT USAGE
2
Align Dicing Kit Cover with wide mouth
feed shoot.
4
1
After dicing, remove the Work Bowl
Cover, Dicing Kit Cover and Dicing Blade,
then insert the Dicing Kit Clean Out Tool
into the Dicing Kit Base and push any
extra food through the grid.
Before operating the Food Processor, be
sure the Work Bowl, Blades/Disc, and Work
Bowl Cover are properly assembled on the
Base (see the "Product Assembly" section).
2
11