Ddns And Upnp Settings - ABUS Security-Center TV7218 Instructions D'installation

DDNS and UPnP settings

„Enable DDNS" Enables the DDNS function.
„Provider" The provider list contains four hosts that provide DDNS services. Connect to the service-
provider's website to make sure that the service is available.
„Host name" This field must be completed if you want to use the DDNS service. Enter the hostname
registered with the DDNS server.
„Username/Email" The user name and the e-mail address must be entered in this field to set up a
connection to the DDNS server or to inform users about the new IP address. Important: If you enter a user
name in this field, you must enter a password in the next field.
„Password/Key" To be able to use the DDNS service, enter the password or the key.
„Enable UPnP" Enables/disables the UPnP function. If UPnP is disabled, the camera cannot be found in the
network environment under MS Windows XP. If the UPnP network component is installed under Windows
XP, the hostname of the security network camera in the network environment is displayed with an IP address
in brackets. Example: Security network camera (192.168.0.96). This means: The hostname of the security
network camera is "Security network camera", and the IP address of the security network camera is
192.168.0.96.
Click this button to save the current settings for the DDNS service and the UPnP function.
"url" http://"Network Camera"/setup/ddnsupnp.vspx
"Network Camera" is the domain name or original IP address of the security network camera.
31