ABUS Security-Center TV7218 Instructions D'installation page 53

normal
sun 0/1
mon 0/1
tue 0/1
wed 0/1
thu 0/1
fri 0/1
sat 0/1
begin_time hh:mm:ss
end_time hh:mm:ss
exclude 0/1
eventop 0/1
delay 1~999
prevnum 0~6
ssfprefix <text string shorter than
60 characters>
dihigh 0/1
dilow 0/1
dirise 0/1
difall 0/1
motion1 0/1
motion2 0/1
motion3 0/1
ioalarm 0/1
mdalarm 0/1
ioupload 0/1
mdupload 0/1
seqop 0/1
sinter 1 ~ 99999
smethod mail
ftp
suffix 0/1
resetdo 0/1
Example: Enable sequential send snapshot by every 1 second with email.
http://myserver/setup/app.vspx?method=set&exclude=1&eventop=0&seqop=1&
smethod=mail&sinter=1
Drive the digital output
Note: This request requires the privilege of I/O access control.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/setdo.cgi?do1=<state>[&do2=<state>]
[&do3=<state>][&do4=<state>][&return=<return page>]
Where state is H, L. H means NC (normal close) connected with COMMON and L means NO (normal open)
connected with COMMON. The number of DO dependents on the server type.
Display normal application page contents
Disable/Enable Sunday weekly schedule check box
Disable/Enable Monday weekly schedule check box
Disable/Enable Tuesday weekly schedule check box
Disable/Enable Wednesday weekly schedule check box
Disable/Enable Thursday weekly schedule check box
Disable/Enable Friday weekly schedule check box
Disable/Enable Satday weekly schedule check box
Begin time of weekly schedule
End time of weekly schedule
Disable/Enable all the time except for the above schedule
check box
Disable/Enable Event operation
Delay seconds before detect next event
Number of pre-trigger event images
Snapshot file name prefix for both event and sequential
operation
Enable/Disable trigger when input is high
Enable/Disable trigger when input is low
Enable/Disable trigger when input is rising
Enable/Disable trigger when input is falling
Enable/Disable trigger when motion int window #1 is detected
Enable/Disable trigger when motion int window #2 is detected
Enable/Disable trigger when motion int window #3 is detected
Enable/Disable DO trigger when DI condition matched
Enable/Disable DO trigger when motion detection condition
matched
Enable/Disable upload snapshot when DI condition matched
Enable/Disable upload snapshot when motion detection
condition matched
Enable/Disable sequential operation
Interval of sequential snapshot in second
Send snapshot by e-mail
Send snapshot by ftp
Enable/Disable FTP put snapshots with date and time suffix
Reset/No reset DO when click save button
53