Time-Controlled Surveillance - ABUS Security-Center TV7218 Instructions D'installation

Time-controlled surveillance

1. On the homepage, click "Configuration".
2. In the left column, click "Application".
3. Click the boxes next to the weekdays you require and define the time period under "Snapshots begin at"
and "Snapshots stop at" for daily supervision of the trigger conditions.
4. Enable "Event operation". The trigger condition can be set to detect series of motions or the status of the
connected device.
5. The delay before detecting the next event is used to prevent continuous error display following the original
event.
6. The delay for recording a snapshot after the event is used for recording the direction of moving objects.
25