Samsung SCC-B2311 Manuel D'utilisation page 23

4) SW4(LSS) :
It is a Sense-Up function that keeps storing the image field
into memory to remove the random noise on the image and
increase the brightness and the contrast ratio. If set to ON,
the camera automatically switches to a maximum of 128
times of storage mode for sharper image.
⑥ FUNCTION SWITCH-2
1) SW1(AGC)
This switch turns on or off the AGC (Auto Gain Control)
function of the camera. If set to ON, the AGC automatically
increases the gain in a low contrast scene of which the iris
couldn't control the brightness.
2) SW2(DNR)
This switch reduces the random noise on the image. In
particular, this is more effective when the SW4 on the
function switch -1 is set to ON.
3) SW3(D/N)
This indicates the DAY & NIGHT function. If set to ON, the
camera outputs a color image during the daytime and enhances
the color sensitivity of the subject in a low contrast scene,
especially at night by turning off the IR cutoff filter.
1. AGC
2. DNR
3. D/N
4. AWB
User's guide
E
23