Remote Control; Setting Up Your Television - Insignia NS-20LCD Guide De L'utilisateur

Component Description
11 AC power Connect the AC power cord to this
connector jack.
12 Power switch Use to turn the television on the first
time.
13 Wall mounting Connect to a standard VESA compliant
location holes wall mounting bracket.

Remote control

1
4
7
9
10
16
19
Button Description
1 INPUT Press to select your input source
from: TV, Video, S-Video, VGA, and
Component inputs
2 SCAN Press to scan through the available
television channels.
3 Press to turn the television on or off.
Power
4 CCD Press to turn on the closed caption
feature.
5 PARENT Press to access the parental controls.
6 LOCK Press to set the child lock. Press again
to unlock the television.
4
Button
7 SAP
8 MUTE
9 MENU
10
Cursor Up
Cursor down
11 Adjust setting
/
2
12 OK
3
5
13 S.MODE
6
14 RECALL
15 P.MODE
8
16 VOL +/–
11
17 CH +/–
12
18 Numeric pad
13 19 SLEEP
20 DISPLAY
14

Setting up your television

15
17
Selecting a location
Place your television on the floor or on a sturdy
platform in a location where light does not
directly hit the screen.
Place your television far enough from the walls
to allow proper ventilation. Inadequate
18 ventilation may cause overheating, which may
damage your television.
Mounting your television
20
The NS-20LCD is a VESA compliant LCD
television. It can be wall mounted using a
standard VESA compliant mounting bracket.
VESA compliant mounting brackets are available
at most electronics stores. The bracket size
should be 100 mm x 100 mm.
Note
Remove your television base before attaching the wall mount.
To remove your television base:
1 Place your television, face down, on a soft,
cushioned, non-slip, non-abrasive surface.
Make sure that it cannot slip or slide.
2 Remove the screws that are holding the base
in place.
www.insignia-products.com
Insignia NS-20LCD Television
Description
Press to select your audio setting
from: SAP, Stereo, or Mono
Press to turn the sound off. Press
again to turn the sound back on.
Press to access the on-screen menu.
Press to move the cursor up or down
/
in a menu.
Press to select or adjust a setting in a
menu.
Press to confirm the adjustment you
made or to return to the previous
menu.
Press to select the sound mode.
Press to return to the previous
channel watched.
Press to select the picture mode.
Press to increase or decrease the
volume.
Press to change to the next or
previous channel.
Press to type in the channel numbers.
Press to set the sleep timer.
Press to display the current channel
and audio mode information.