Using The Menu - Insignia NS-20LCD Guide De L'utilisateur

Insignia NS-20LCD Television
Rating Defined as
C8+ Children eight years and older
13+ Programming may not be suitable for
children under the age of 13.
16+ Programming may not be suitable for
children under the age of 16.
18+ Adult programming
NA Rating not applicable

Using the menu

To use the menu:
1 Press MENU to enter the main menu.
2 Press or
3 Press to enter the submenu.
4 Press or
adjust.
5 Press to adjust the item.
6 Press OK to confirm your selection.
7 Press OK to exit the menu.
Menu Settings
Picture Adjust picture
Audio Adjust audio
Headphone
Equalizer
to select the submenu.
to select the item you want to
Description
Adjust the following picture
qualities:
• Brightness
• Contrast
• Saturation
• Sharpness
• Color Temp
• Phase
Note: Phase is only available if the
input signal is from the VGA or
component jacks.
Note: Adjustments you make are
stored as the USER picture preset.
To select the USER picture preset,
press P.MODE repeatedly until the
word USER appears on the screen.
Adjust the following sound qualities:
• Treble
• Bass
• Balance
• Headphone
• Equalizer
Note: Adjustments you make are
stored as the USER audio preset. To
select the USER audio preset, press
S.MODE repeatedly until the word
USER appears on the screen.
Adjust the following headphone
settings:
• Volume
• Balance
Adjust the following equalizer
settings:
• 100Hz
• 300Hz
• 1K
• 3K
• 8K
www.insignia-products.com
Menu Settings
Geometry Geometry
General Timer
Settings
V-Chip
OSD Language
CC Mode
MTS
Reset menu
Search TV Reception
Skip
Auto Search
Description
Adjust the following settings:
• Auto Configuration—If the
image looks abnormal, select
this to correct the image.
• H Position—Move the image
on the screen horizontally.
• V Position—Move the image
on the screen vertically.
• H Clipping—Extend or
shorten the image in the
horizontal direction.
Note: H Clipping is only available if
the input signal is from the VGA or
component jacks.
Adjust the following settings:
• Clock—Set the local time.
• On/Off—Your television
automatically turns on,
switches to standby, or
jumps to a preset channel
when the preset time is
reached.
• Time—Set the preset time,
turn on time, or standby
time.
• Program—Preset the
channel number that your
television turns to at the
preset time.
Access the parental control menu.
You can also access the same menu
by pressing PARENT on the remote
control.
Change the language used for the
menu.
Select from among the different
types of closed captioning options:
CC1-4, T1-4, and Off.
Select from among the different
MTS modes: Stereo, SAP, and
Mono.
If you select ON, the OPTION menu
appears the next time you turn on
your television.
Select the television source from
among: Air or Cable.
Select to skip a preset channel when
using the CH + or CH - buttons.
Press to preset the channels.
11