Connecting your television to AC power
Use the AC cord to connect to AC power.
To connect your television to AC power:
•
Insert the AC cord plug into a standard 120V
60 Hz AC power outlet.
2
Notes
Never connect the AC line cord plug to other than the specified
voltage (120V 60 Hz). Use the attached power cord only.
8
Installing batteries in the remote control
To install batteries in the remote control:
1 Open the battery cover.
2 Install two AAA batteries matching the +/–
battery terminals to the +/– marks inside the
battery compartment.
3 Replace the battery cover.
Notes
• Do not try to recharge batteries that are not rechargeable.
• Use only the size and type of batteries specified. Do not mix
different types of batteries together or old batteries with
fresh ones.
• When the remote control will not be used for a long period
of time or when the batteries are worn out, remove the
batteries.
1
• Do not throw the batteries into a fire. Dispose of used
batteries according to local regulations.
• Do not drop, dampen, or disassemble the remote control.
Using the remote control
The effective range of the remote control is
shown in the following diagram.
www.insignia-products.com
Insignia NS-20LCD Television
30
30
6m
6m
8m
6m
8m
6m