Cleaning And Maintenance - Philips OneBlade QP2531 Mode D'emploi

Cleaning and maintenance

Trimming with comb
1 Place the comb onto the blade, with the teeth
of the comb pointing upwards.
Note: Always trim in the direction of the teeth of
the comb. This will give you the best results.
2 Switch on the appliance.
3 Place the comb onto the skin and move the
appliance in the direction of the teeth of the
comb.
Note: For the best result, move it against the
grain.
4 Switch off and clean the appliance after every
use (see 'Cleaning and maintenance').
5 To remove the comb, hold it on both sides and
pull it off the blade.
Clean the appliance after every use.
Caution: Never use compressed air, scouring
pads, abrasive cleaning agents or aggressive
liquids such as petrol or acetone to clean the
appliance.
Caution: Do not tap the appliance against a
surface to remove water from it, as this may
cause damage. Replace the blade if it is
damaged.
15
English