Table des Matières
Publicité
3
Press the on/off button to switch on the appliance.
4
Hold the appliance in the position that is most convenient for the
area you want to trim and make upward or downward strokes.
Tip: For a comfortable trim close to your skin, place the flat side of the
trimming head against your skin and make strokes in the desired direction.
5
When you are finished, press the on/off button to switch off the
appliance.
Cleaning and maintenance
Clean the appliance after every use.
Never use compressed air, scouring pads, abrasive cleaning agents or
aggressive liquids such as petrol or acetone to clean the appliance.
Note: The trimming head does not need any lubrication.
Cleaning the appliance and the comb
1
Switch off the appliance.
2
Pull the comb off the trimming head.
3
Clean the trimming head under the tap with lukewarm water or
clean it with the cleaning brush supplied.
4
Clean the comb under the tap or clean it with the cleaning brush
supplied.
Cleaning the trimming head connector
Note: Make sure you clean the trimming head connector at least once every
three months.
English
11
Publicité
Table des Matières
