Technical Specifications - Haussmann M1Q-DU12-80 Guide De L'utilisateur

tecHnical sPeciFicatiOns

Product Code
Model number
Voltage rating
Current rating
No-load speed
Stroke length
Max. cutting capacity
Bevel range
assemBlY
warning! Always ensure that the tool is switched off and the plug
is removed from the power source before making any adjustments or
performing maintenance procedures.
1. attacH Blade (Figure 2 & 3)
The depth of cut should be set according to the thickness of the
workpiece.
• Disconnect plug from power source and remove the footplate sleeve
• Loosen the depth adjustment knob located between the guard and the
jigsaw handle.
• Insert the saw blade (teeth in cutting direction) until it latches in the
plunger. When inserting the saw blade, the back of the blade must rest
in the groove of the guide roller.
• To remove blade, lift tool-less blade change cover up with index finger
and thumb and remove blade.
• Use with T shank jigsaw blades only.
Fig. 2
TOOL-LESS
BLADE CHANGE
COVER
OPeratiOn
warning! Always use the correct voltage: The voltage of the power
source must match with the values on the nameplate of the power tool.
1. switcH
• To switch the jigsaw on, squeeze the switch trigger (1).
• For continuous cutting, squeeze the switch trigger (1) and depress the
lock-on button (2). Once lock-on button is depressed, release the switch
59595064
M1Q-DU12-80
120V AC / 60Hz
6.5 AMP
0-3000 SPM
23/32" (1.8 MM)
Steel 5/16" (8 MM)
Wood 3 3/32" (80 MM)
0º - 45º
Fig. 2
BLADE
ROLLER
GUIDE
8