Power Supply (Transmitter); Charging The Headphone Battery - Medion LIFE E62003 Notice D'utilisation

There is a keyhole hanger on the back of the transmitter for
attaching the device to a room wall.
 Take care to ensure that the keyhole hanger is
positioned with the narrow part pointing upwards.
 Use an appropriate countersunk screw
(e.g. 3.0 mm x 30 mm, not supplied) for wall mounting.
6.2.

Power supply (transmitter)

 Connect the supplied mains adapter to the DC IN port
on the transmitter.
 Plug the mains cable into an easily accessible mains
socket (100–240 V~ 50/60 Hz).
6.3.

Charging the headphone battery

You can charge the headphone battery either using the
supplied micro USB charging cable or by placing it on the
transmitter.
 Make sure the headphones are switched off and charge
them for at least two hours.
6.3.1. Charging using the micro USB charging
port
 Connect the supplied micro USB cable to the micro USB
charging port on the headphones.
 Connect the other end of the micro USB cable to a USB
power source (5.0 V
notebook.
The charging LED lights up red during charging.
The charging LED turns off once the headphone battery is
fully charged.
500 mA), e.g. on your PC or
DE
EN
FR
NL
ES
IT
55