Honda GX270 Manuel De L'utilisateur page 8

Masquer les pouces Voir aussi pour GX270:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 17
Oil Level Check
Check the engine oil level with the engine stopped and in a level
position.
1. Remove the oil filler cap.
2. Check the oil level. If it is below the upper limit, fill with the
recommended oil to the upper limit (see page 7).
3. Reinstall the oil filler cap securely.
OIL FILLER CAP
Running the engine with a low oil level can cause engine damage.
This type of damage is not covered under the Warranty.
Oil Change
Drain the used oil when the engine is warm. Warm oil drains
quickly and completely.
1. Place a suitable container below the engine to catch the used oil,
then remove the oil filler cap, oil drain plug and washer.
2. Allow the used oil to drain completely, then reinstall the oil
drain plug and a new washer, and tighten the oil drain plug
securely.
3. With the engine in a level position, fill with the recommended
oil (see page 7) to the upper limit.
Engine oil capacity: 1.1 L (1.0 lmp qt)
Running the engine with a low oil level can cause engine
damage. This type of damage is not covered under the
Warranty.
8
4. Install the oil filler cap and tighten securely.
OIL FILLER CAP
WASHER
UPPER LIMIT
Wash your hands with soap and water after handling used oil.
Please dispose of used motor oil in a manner that is
compatible with the environment. We suggest you take it in a
sealed container to your local service station for reclamation.
Do not throw it in the trash, pour it on the ground, or pour it
down a drain.
ENGLISH
OIL LEVEL
OIL DRAIN PLUG

Hide quick links:

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Gx340Gx390

Table des Matières