Installation Requirements; Tool And Parts - Dacor DTI30M Serie Instructions D'installation

Installation requirements

Tool and parts

Tools you will need
Pencil Phillips Head Screwdriver Ruler or Straightedge
Safety Glasses Saber Saw / " Drill Bit & Electric or
1
8
Hand Drill
Parts needed
• A UL listed or CSA approved connector for / " (1.3 cm) diameter conduit\
1
2
• UL listed wire connectors
Check local codes. Check existing electrical supply. See the "Electrical requirements"
section.
It is recommened that all electrical connections be mafe by a licensed, qualified electrical
installer.
6 English
NZ9500K_MOD_DTI30M977B_DG68-00898A-00_EN+MES+CFR.indb 6 2017-04-05 3:02:28