Dacor DTI30M Serie Instructions D'installation page 15

STEP 3-1 Bracket Guide Installing -Main
The bracket Guide can be installed after cooktop is placed into the cutout.
Bottom of Cooktop
M4 L10 screw
M4 L16 screw
STEP 3-2 Alternative Bracket Guide Installing
The bracket Guide can be installed after cooktop is placed into the cutout.
Cooktop
NZ9500K_MOD_DTI30M977B_DG68-00898A-00_EN+MES+CFR.indb 15
Countertop
UNC 24 / L75
3
16
screw
M4 X L10 screw
1. Attach bracket guide to bottom of
cooktop and side of wall.
2. Adjust to match hole of bracket and
bottom of cooktop.
3. Tighten screw enough to hold bracket
in place when cooktop is placed in
cutout.
4. Using 2 or more people, turn the
cooktop right side up and place in
cutout.
NOTE
Make sure that the front edge of the
cooktop is parallel to the front edge of the
countertop. If repositioning is needed, lift
entire cooktop up from cutout to avoid
scratching the countertop.
1. Attach bracket guide to bottom and
select bracket location.
2. Tighten screw bracket guide to base of
cooktop.
3. Install UNC 24 / L75 screw until it
3
16
touches the bottom of the countertop.
Turn the thumbscrew until bracket touches
the bottom of the countertop. Do not over
tighten.
English 15
2017-04-05 3:02:29