Arturia MINIMOOG-V Manuel De L'utilisateur page 93

Version 2.0
Table des Matières

Publicité

Arturia uses a hardware device connected through the USB connection of a computer, the
"Syncrosoft key" and/or a protection scheme, the "Soft eLicenser" for license control (hardware
and/or software dongle). The Syncrosoft key and/or Soft eLicenser permanently saves the license
information and regulates access to the software. If a Syncrosoft key is required for the use of the
software, then the Syncrosoft key must be connected physically to the computer through the USB
interface.
For the activation of the software, updates or upgrades of the software the computer which is
connected to the Arturia key and/or using the Soft eLicenser or using the OEM software must be
connected to the server of SIA Syncrosoft through the Internet. If the product was delivered with
the Syncrosoft key, the license information was already transferred to the Syncrosoft key. If the
product was delivered with a product card (without the Syncrosoft key), the activation codes of the
enclosed product card must be entered manually by the user upon installation and the license
information must be exchanged with the server of SIA Syncrosoft.
In the event of OEM software, the activation codes will be send to an email-address submitted by
you during a registration and must be entered manually by the user upon installation and the
license information must be exchanged with the server of SIA Syncrosoft.
The reinstallation of the software - on the same or another computer - is permitted only in case the
already installed software cannot be used any more (e.g. following deinstallation). If the software
does not use a Syncrosoft key, the new activation codes may be obtained from the users online
account for support created during the personal product registration. Further, the activation codes
must be entered manually by the user upon installation and the license information must be
exchanged with the server of SIA Syncrosoft. Arturia may require for the provision of further
activation codes e.g. your proof of purchase (invoice, receipt) and a signed assurance by fax or
letter stating your name, address and that the already installed software cannot be used any more.
You can also use another computer other than the one on which the software is to be installed for
the activation and transfer of license data to the Syncrosoft key, if the software is using a
Syncrosoft key. However, in such a case a corresponding access software (Syncrosoft License
Control Centre, "LCC") must be installed on the computer connected to the Internet, which is
subject to a separate licensing agreement.
6. Defect and loss of the Syncrosoft key
In the case of a defect or damage to the Syncrosoft key Arturia or a third party engaged by Arturia
will check the Syncrosoft key. In the case of a legitimate claim the Syncrosoft key and the licenses
included shall be replaced in return for a handling fee. The licenses will only be replaced provided
that they are licenses issued by Arturia. Further claims against Arturia are excluded.
Arturia assumes no liability or obligation if the Syncrosoft key is mislaid as a result of loss, theft or
otherwise. Arturia reserves the right to block the licenses saved on the Syncrosoft key upon being
notified by the registered user of the loss. The licenses saved on the Syncrosoft key cannot be
replaced.
7. No Unbundling
The software usually contains a variety of different files which in its configuration ensure the
complete functionality of the software. The software may be used as one product only. It is not
required that you use or install all components of the software. You must not arrange components
of the software in a new way and develop a modified version of the software or a new product as a
result. The configuration of the software may not be modified for the purpose of distribution,
assignment or resale.
You may also not sell the Syncrosoft key separately as a license; the usage rights always remain
with the software, in particular with the original software data carrier (e.g. CD).
8. Assignment of Rights
You may assign all your rights to use the software to another person subject to the conditions that
(a) you assign to this other person (i) this Agreement and (ii) the software or hardware provided
with the software, packed or preinstalled thereon, including all copies, upgrades, updates, backup
copies and previous versions, which granted a right to an update or upgrade on this software, (b)
you do not retain upgrades, updates, backup copies und previous versions of this software and (c)
the recipient accepts the terms and conditions of this Agreement as well as other regulations
pursuant to which you acquired a valid software license.
A return of the product due to a failure to accept the terms and conditions of this Agreement, e.g.
the product activation, shall not be possible following the assignment of rights.
9. Upgrades und Updates
You must have a valid license for the previous or more inferior version of the software in order to
be allowed to use an upgrade or update for the software. Upon transferring this previous or more
inferior version of the software to third parties the right to use the upgrade or update of the
software shall expire.
93
ARTURIA – Minimoog-V – MANUEL DE L'UTILISATEUR

Publicité

Table des Matières
loading

Table des Matières