Accessory List - B.A. International Optima BA65E Mode D'emploi

• Operators and all others in the area must wear eye
protection when operating this handpiece.
• If the handpiece has not been used for a long period,
check for noise, vibration, and overheating before use.
• Never use Reverse Rotation. It may run out the Rubber
Cup/Brush and cause an injury.

2. Accessory List

No. Part Name
1 Nozzle for E-fitting
2
Quantity
1
3. Connecting handpiece and motor
3-1 Connecting
Insert handpiece into motor. (Fig. 1)
3-2 Disconnecting
Hold motor's front side and headpiece's rear side, and then pull
those out.
CAUTION
• Do not connect or disconnect the handpiece until the
drive motor has completely stopped.
• Connect only E type joint (ISO 3964 (EN ISO 3964)).
• Do not exceed motor's max. rotation speed
(20,000min ).
-1