B.A. International Optima BA65E Mode D'emploi page 9

6-3 Disinfection
Manual Disinfection (External Surface)
Wipe the surface with cloth soaked in disinfectant solution
such as alcohol.
Automatic Disinfection (External and Internal Surfaces)
Use a thermo-disinfector in accordance with ISO 15883
(EN ISO 15883).
Refer to the thermo-disinfector manual.
6
6-4 Lubrication
BA ULTIMATE SPRAY
Apply BA ULTIMATE SPRAY every time after each use and/or
before autoclaving.
1) Attach the Spray Nozzle into the Spray Port nozzle on the
can.
2) Insert the Spray Nozzle into the rear of the handpiece. Hold
the handpiece and spray for approximately 2-3 seconds.
Apply lubricant until it expels from the handpiece head for
at least 2 seconds (Fig. 4).