CERTIFIED 060-0582-0 Guide D'utilisation page 25

24
model no. 060-0582-0
3. Install the new scraper bar and fasten it
securely to the snowblower with the two
screws (Fig. 26).
Replacing the Belt and Pulley
1. Remove the screws from the left panel of
the snowblower and remove the left panel
(Fig. 27).
2. Lift the belt tension pulley and roll the worn
belt up and off the big pulley from the top
of the big pulley (Fig. 28).
I contact us: 1-844-428-7277
Belt tension
loosen
tighten
Fig. 26
Fig. 27
Fig. 28
Belt
Big pulley