Firman T07571 Manuel D'utilisation page 19

•
Exchanging fuel cylinders to allow the first cylinder to warm up, repeating as necessary.
•
Placing the LPG cylinder at the end of the generator near the handle, where engine fan
air flows out from the generator. This air is slightly heated by air flowing over the engine.
Do not place the LPG cylinder in the path of the muffler exhaust outlet.
•
The LPG cylinder and components can be temporarily warmed by pouring warm water over
them.
5. Starting the Generator on NG
1. Before starting the generator, check for loose or missing parts and for any damage which may
have occurred during shipment. Ensure spark plug, muffler, fuel cap, and air cleaner are all in place.
2. Move portable generator outdoors to safe operating location at least 20 feet from any occupied
spaces.
3. Connect the NG hose to both the NG source and portable generator LPG/NG Hose Connector (inlet).
4. Fully open the NG source valve.
English
Muffler
NG Shut Off Valve
18
OPERATION
Customer Service: 1-844-FIRMAN1