What To Do In Case Of Breakdown - Henco M-BMINI3 Manuel D'instructions

Screen resolution:
Miscellaneous:
16.2 Plug & Play
After successful installation of the program the battery powered tool is auto-
matically recognised by the computer and the programs or data can thus be
updated .
A detailed installation instruction can be found on the CD-ROM provided.
17.

What to do in case of breakdown

In case of failure the pressing tool is shut down automatically and remains
blocked. Th e service LED illuminates red or orange. Further process is only pos-
sible by changing the battery or respectivly removing it for a short time.
If the failure of the pressing tool continues after „reset", contact your service
center.
17.1 Error codes Service
Failure
after pressing process
green light
green/red fl ashing
red fl ashing
red light
orange light
after inserting the battery
green ligth
orange light
17.2 Error codes battery
30
1024 x 768 or greater, 65.535 colours or more
CD-ROM-Reader, USB 2.0
Cause / trouble shooting
Operating data OK
Operating data OK and service interval
exceeded / service needed
Operating data
service center
Operating data
Temperature failure / tool has to be hea-
ted up or cooled down
No failure
Temperature failure / tool has to be hea-
ted up or cooled down
marginal / please contact
false service needed
M-BMINI3