General Indications; Application And Use Not In Conformity With The Intended Purpose; Precautions In Using The Equipment - Henco M-BMINI3 Manuel D'instructions

5.

General indications

L
Danger: Th e manufacturer is not responsible for damage to persons or
property caused by non-observance of the instructions.
Th is device shall be used exclusively for its intended use. Th is product
shall only be used by instructed personnel whereby this instruction ma-
nual shall be carried with the machine for its entire life period.
Th e user is required to:
• make the instruction manual available to operators
• ensure that the operator has read and understood the instructions
P
For all legal intents and purposes, the German versions of this instruction
manual is valid.
6.

Application and use not in conformity with the intended purpose

Th e electro-hydraulic press tool is exclusively used for the production of a per-
manent connection between tubes and press fi ttings in all usual types of ma-
terial, such as PE-X-, multilayer composite and metal systems. Th e tool is only
suitable for manual operation and after a series of approx. 40-50 press cycles,
it must be allowed to cool down for about 10 minutes. See table on page 27 for
the corresponding range of application Th e hydraulic powered compression
tool may be used exclusively in environments with illumination of at least 400
lux, or in daylight.
7.

Precautions in using the equipment

A
Caution: Th e non-observation of the safety instructions may create a si-
tuation of danger for the life and health of persons, or may cause material
damage to the machine and the surrounding environment!
A
Caution: Never place fi ngers or other parts of the body into the working
area of the pressing jaws!
A
Caution: Keep away from other persons. Keep unauthorised persons away
from the working area while the battery-powered tool is operating!
A
Caution: Wear appropriate working attire, gloves and safety shoes!
M-BMINI3
23