Technical Data - Henco M-BMINI3 Manuel D'instructions

1.

Technical data

Shearing force:
Max. Lift:
Battery voltage:
Motor:
Battery capacity:
Time of pressing cycle
Type of battery:
Charging time:
Noise level:
Acceleration:
Hydraulic oil:
Operating temperature:
Dimensions basic unit:
Mass basic unit:
A
Caution: Th e mechanical return switch allows the operator to restore the
tool to the starting position in emergency cases and thus to remove the
pressure from the compression head.
20
19 kN
30 mm
18 V DC
with permanent magnets in continuous current
1,5 Ah (optionally 3,0 Ah)
approx. 3-4 sec.
Li-Ion (without memory eff ect)
approx. 30 min.
75 dB (A) at a distance of 1 m
< 2,5 m/s² (eff ective weighted value of accelera-
tion)
Typ „Shell-Naturelle HF-E 15"
from -10 °C to +40 °C
approx. 371 x 100 x 74 mm (without power pack)
approx. 1,8 kg (without power pack)
M-BMINI3