Publicité
Les langues disponibles
Les langues disponibles
• Use only a soft dry cloth to clean - do
not use cleaning products or detergent.
• Do not keep your finger on the on/off
switch continuously - it is better to grind
in short bursts.
• We recommend that you store the mill
in an upright position.
Any of the following may cause the
batteries to leak and damage
your mill:
• Use of batteries past their expiry date.
• Any exposure to a heat source.
• Use of flat batterie.
We recommend that the batteries are
removed from the mill if it will not be
used for a long period.
The manufacturer will not accept liability
arising from any abuse, use or treatment
not
in
instructions.
Installing and
replacing the batteries
Follow the instructions in diagram
.
In order to replace the motor in the motor
unit ensure that the arrows
as shown in diagram
• Use only non-rechargable AAA/LR03
alkaline mercury free batteries to ensure
maximum motor power.
• Always replace all the batteries at the
same time with six new AAA/LR03
alkaline batteries of the same brand.
accordance
with
these
coincide
.
+
Publicité
