Publicité
Les langues disponibles
Les langues disponibles
Cleaning and
light bulb replacement
Cleaning: This salt mill is an electric
appliance. Do not immerse in water.
Clean only by wiping with a soft, dry
cloth.
Replacing the light bulb: See diagram
.
Trouble-shooting
There are three possible problems:
• The light does not work.
• The motor works but the mill does not
grind.
• The motor does not work.
1- Faulty light
Check that the contacts are clean
• Separate the motor compartment from
the salt compartment.
• Clean the contacts on the salt
compartment
compartment with a dry cloth as shown
in diagram
• Replace the motor compartment on the
salt compartment.
Ensure that a light bulb is fitted
• If one is fitted, it may not be making a
contact so replace it (see diagram
• If there is no light bulb or it is broken:
insert a new one as shown in diagram
.
and
.
the
motor
).
Publicité
