Avertissements - Inglesina Cab Base Manuel D'instructions

Install the Inglesina car system only IN THE OPPOSITE DIRECTION TO THE DRIVING
ONE.
POSITIONING AND INSTALLATION OF THE INGLESINA CAB CAR SYSTEM
fig. 2 After having positioned the base on the vehicle seat, pass the lower
segment (S1) of the car safety belt through the lateral belt guiding elements (A); then,
hook the car safety belt properly.
fig. 3 Install the Inglesina Cab 0+ child car seat to the Inglesina Cab Base only IN
THE OPPOSITE DIRECTION TO THE DRIVING ONE, until hearing both CLICK sounds
indicating the occurred hooking.
CAUTION: make sure that the child car seat is properly hooked on both sides,
trying to lift it.
fig. 4 Rotate the child car seat handle (B) to the most forward position. Make sure
that the two buttons (D) completely come out, after having arranged the handle to
the proper position.
fig. 5 Pass the diagonal segment (S2) of the car safety belt through the rear
guides (G).
CAUTION: make sure that the safety belts are well stretched and not twisted.
Only in this way it is possible to obtain the perfect anchoring of the Inglesina
Cab car system.
REMOVAL OF THE INGLESINA CAB CAR SYSTEM
fig. 6 By pressing the two buttons (D) simultaneously, rotate the child car seat
handle to the vertical position and, after having removed the safety belt diagonal
segment from the rear guides (E), acting on the lever (I), lift it from the Inglesina Cab
Base by holding it from the handle. The base remains on board, ready for use.
fig. 7 To remove the Inglesina Cab Base from the vehicle seat, it is sufficient to
completely unhook the safety belt freeing the lateral belt guiding elements (A).

AVERTISSEMENTS

LIRE
ATTENTIVEMENT AVANT UTILISATION ET LES
CONSERVER POUR LES BESOINS ULTÉRIEURS
DE RÉFÉRENCE. NE PAS TENIR COMPTE DES MISES
EN GARDE ET DES INSTRUCTIONS FOURNIES PEUT
S'AVÉRER TRÈS DANGEREUX POUR VOTRE ENFANT.
VOUS ÊTES RESPONSABLE DE LA SÉCURITÉ DE VOTRE
ENFANT.
LES INSTRUCTIONS SUIVANTES
15