Inglesina Cab Base Manuel D'instructions page 14

SPARE PARTS / AFTER SALES SERVICES
• Regularly inspect the safety devices to ensure the product's functionality over time.
Do not use the product in the event of any malfunction and/or anomaly. Promptly
contact your Authorised Retailer or the Inglesina Customer Care service.
• Do not use spare parts or accessories not supplied and/or not approved by Inglesina
Baby S.p.A.
WHAT TO DO IF YOU REQUIRE ASSISTANCE
• If you require assistance for your product, immediately contact the Inglesina Retailer
that sold it to you, with the "Serial Number" relative to said object ready on hand (the
"Serial Number" is available from the 2010 Collection).
• It is the Retailer's duty to contact Inglesina to assess the best suited intervention
case by case and then provide the subsequent indications.
• The Inglesina Customer Care Service can provide any information, following written
request by filling out the form provided on the website: inglesina.com - Warranty and
Assistance section.
HINTS FOR CLEANING AND MAINTAINING THE PRODUCT
• The child car seats could leave traces on the vehicle seats, due to the measures taken
to install it firmly in compliance with safety standards. This product was designed to
minimize this effect as much as possible. The manufacturer cannot be considered
liable for eventual traces deriving from normal use of the child car seat.
• Never force any mechanisms or moving parts; in case of doubt, check the instruction
first.
• Store the product in a dry place.
• Protect the product against weather agents, water, rain or snow; moreover,
continuous and prolonged exposure to sunlight can cause changes in the colour of
many materials.
• Clean the plastic and metal parts with a damp cloth or with a mild detergent; do not
use solvents, ammonia or benzine.
• Carefully dry metal parts after any contact with water to prevent the formation of
rust.
INSTRUCTIONS
LIST OF COMPONENTS
CAB BASE
fig. 1
A Lateral belt guiding elements
IMPORTANT
Verify that on the vehicle seat there are not any items that may hinder the correct
leaning of the Base to the vehicle seat.
Verify that the backrest is in vertical position and the vehicle seat where the car base
has to be installed is NOT EQUIPPED WITH FRONT AIRBAG.
14