Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
unfamiliar with the power tool or these instructions to operate the power
tool. Power tools are dangerous in the hands of untrained users.
e)
Maintain power tools and accessories. Check for misalignment or binding of
moving parts, breakage of parts and any other condition that may affect the
power tool's operation. If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
f)
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
g)
Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to
be performed. Use of the power tool for operations different from those intended
could result in a hazardous situation.
5)
Battery tool use and care
a)
Recharge only with the charger specified by the manufacturer. A charger
that is suitable for one type of battery pack may create a risk of fire when used with
another battery pack.
b)
Use power tools only with specifically designated battery packs. Use of any
other battery packs may create a risk of injury and fire.
c)
When battery pack is not in use, keep it away from other metal objects, like
paper clips, coins, keys, nails, screws or other small metal objects, that can
make a connection from one terminal to another. Shorting the battery terminals
EN
together may cause burns or a fire.
4
d)
Under abusive conditions, liquid may be ejected from the battery; avoid
contact. If contact accidentally occurs, flush with water. If liquid contacts
eyes, additionally seek medical help. Liquid ejected from the battery may cause
irritation or burns.
6)
Service
a)
Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power tool is
maintained.
SAFETY INSTRUCTIONS FOR ALL OPERATIONS:
Safety warnings common for grinding, sanding or abrasive cutting-off opera-
tions:
a)
This power tool is intended to function as a grinder, sander or cut-off tool.
Read all safety warnings, instructions, illustrations and specifications
provided with this power tool. Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
b)
Operations such as wire brushing or polishing are not recommended to be
performed with this power tool. Operations for which the power tool was not
designed may create a hazard and cause personal injury.
c)
Do not use accessories which are not specifically designed and
Publicité
Table des Matières
