osann One360 SL Mode D'emploi page 24

EN
3) Group 2/3 (forward-facing)
(For children weighing 15–36 kg)
INFORMATION:
FIRST, REMOVE
THE SUPPORT LEG MUST BE RETRACTED AND MUST NOT TOUCH THE CAR FOOTWELL. THE
SUPPORT LEG INDICATOR MUST THEREFORE SHOW RED.
1. Follow the installation steps 1 to 4 in Point 2 (Group 1, forward-facing).
2. Now thread the diagonal belt through the car's 3-point belt guide on the
head support of the child car seat.
3. When placing your child in the child car seat, turn the car seat towards the car door for con-
venience.
4. Put your child in the child car seat.
5. Adjust the height of the head support so that the child's head is completely posi-
tioned in the
child's shoulder height.
6. Turn the seat into the forward-facing position. Check whether the child car seat is locked in
this position.
7. Close the belt buckle of the car's 3-point belt again until you hear a click.
8. Pull the diagonal strap in order to tighten it. Please ensure that the straps are not twisted.
9. The child car seat may only be used in seat position 1 for this age group.
THE BELT
head support and the diagonal belt exits the belt guide at the
- 24 -
SYSTEM AS PREVIOUSLY DESCRIBED.