osann One360 SL Mode D'emploi page 20

EN
Isofi x connectors
• Insert the yellow insertion aids through the slit in
the cushion between the backrest and seat and
into the Isofi x holders.
• When doing this, the fl at side must be facing
downward. This step is not necessary if the vehicle
already has fi rmly installed insertion aids.
• Press the buttons on the Isofi x connectors on both
sides to extend these.
• Slide the Isofi x connectors into the insertion aids
and press them in until you hear these lock in
place.
• The indicators on both sides only show green
when the connections are in place. Press the child
car seat against the backrest until it is securely in
position.
Support leg
• Fold out the support leg underneath the child car
seat.
• Press the button to adjust the height of the support
leg and ensure that this is fully in contact with the
footwell of your vehicle.
• Ensure that the indicator on the support leg is
showing green.
The comfort insert and baby insert
Comfort insert
up to max. 18 kg
- 20 -
Baby insert
(under comfort insert)
up to max. 9 kg