osann One360 SL Mode D'emploi page 22

EN
INSTALLATION OF THE CHILD CAR SEAT
1) Group 0+/1 (rear-facing)
(For children from 0 to 18 kg)
1. Press the two lateral Isofi x connector buttons in order to extend the length of the Isofi x
connectors.
2. Fold out the support leg.
3. Guide the Isofi x connectors to the Isofi x connector pieces on the seat of the vehicle and
ensure that they lock in position.
4. Slide the child car seat until it rests securely against the backrest of the car seat. Please
ensure that both Isofi x indicators are showing green.
5. Press the button to adjust the height of the support leg and ensure that this is fully in contact
with the footwell of your vehicle.
6. Please ensure that the indicator on the support leg is showing green.
7. Set the child car seat to the maximum reclining position and turn it until it points to the blue
seat position 4 when facing backwards.
8. When placing your child in the child car seat, turn the car seat towards the car door for convenience.
9. Loosen the belt buckle on the child car seat and place the belts on the outer side of the seat.
10. Put your child in the child car seat.
11. Adjust the height of the head support so that the shoulder belt remains free.
12. Close the belt buckle again until you hear a click.
13. Pull the front adjustment tab in order to tighten the belts. Please ensure that the straps are
not twisted.
14. Turn the seat into the rear-facing position. Check whether the child car seat is locked in
this position.
- 22 -