Safety Cut-Out; Cleaning And Care - Klarstein BLANCA Mode D'emploi

Week timer display
Weekday: Displays the currently
selected day during input.
T1/T2:
2 heating
periods can
be set per
day. Here
you can see
which period is
currently set.

SAFETY CUT-OUT

This appliance is fitted with a safety cut-off which will operate if the fire overheats (e.g.
due to blocked air vents). For safety reasons, the fire will NOT automatically reset.
To reset the appliance, disconnect the appliance from the mains supply for at least 15
minutes. Reconnect to the mains supply and switch on the appliance.

CLEANING AND CARE

Note: Turn off the unit and unplug it from the power outlet. Wait until the unit has
completely cooled down before cleaning it.
• Use a vacuum cleaner to clean the ventilation slots and grilles.
• Remove dust on the outside surfaces with a damp (not wet) cloth.
• Do not use strong cleaning agents or abrasives.
• Do not spray the device with liquids or immerse it in water or other liquids.
• Never open the heater housing.
Time display:
Displays the currently
selected time during
input.
On/Off: Shows
whether the set timer
is On or Off.
EN
25