Error Codes; Technical Information - Farberware FCD06ASWWHC Manuel D'utilisation

ERROR CODES

When some malfunctions come on, the appliance will display error codes to warn you:
CODES
E1 Longer inlet time
E2 Not reaching required
temperature
E3 Overflow
E4 Failure of
communication
between main PCB
with display PCB
WARNING:
a service. If there is water in the base pan because of an overfill or small leak,
the water should be removed before restarting the dishwasher.

TECHNICAL INFORMATION

27
MEANINGS
Faucets is not opened or water intake is
restricted, or water pressure is too low.
Malfunction of heating element.
Some element of dishwasher leaks.
Open circuit or break wiring for the communication.
If overflow occurs, turn off the main water supply before calling
POSSIBLE CAUSES
Height 17.24
Width 21.65
Depth 20.08
Voltage See rating label
connected load
Water pressure 0.04-1.0MPa
Hot water Should be
connection 120-degrees F
Power supply See rating label
Capacity 6 place setting