Quality Control (Qc) Menu - Medtronic ACT Plus Manuel De L'utilisateur

ACT_CH.fm 6/23/04 1:23 pm
UC200304151c ML
5.5" x 7.75" (139.7 mm x 196.85 mm)
9. To view the choices, continue to press [Language]. The default language is
English.
10. To confirm the selection, press [Enter].
The following variable function keys appear on page 2 of the Instrument
Parameters screens: [Screen Contrast Adjustment], [Output Location], [Back
to Page 1 of 2], and [Exit to Main Menu].
1. To adjust the contrast on the LCD screen, select [Screen Contrast
Adjustment]. The (-) key will lighten the text, and the (+) key will darken the
text.
2. To select the output mode for transferring patient and QC data, select [Output
Location].
3. To view the choices, [Floppy] or [Serial], continue to press [Output
Location].
4. To confirm the selection, press [Enter].
5. To return to the Main Menu, press [Main Menu].

Quality Control (QC) Menu

To get the Quality Control Menu select [Quality Control]. If User Lockout is turned
ON, a valid User ID will be needed. Enter the valid User ID from the keypad or scan
the user's badge.
The following variable function keys appear on the Quality Control Menu: [Control
Type], [Control Lot], [Temperature Adjustment], [QC Due Status], [QC
Manager Set Up], and [Exit to Main Menu].
Note: All QC testing (liquid and electronic) must be performed from the Quality
Control Menu to log the controls into the Data Manager. To access the Quality
Control Menu, select the [Quality Control] key on the right-hand side, below the
display screen.
24 English
86702-001 Rev 1.0
Medtronic Confidential
ACT Plus™ Operator's Manual
CS010