Zephyr Roma Groove ZRG-E30AS Guide D'utilisation, D'entretien Et D'installation page 49

BLUETOOTH SPEAKER TROUBLESHOOTING PROCEDURES
Issue Cause
The hood 1. The speaker's Bluetooth is not actively pairing
speakers will with any devices.
not pair with the
user's device. 2. The speaker's Bluetooth has stopped pairing
with devices, signaled by a sound indication.
3. There are competing devices attempting to pair
with the speakers.
4. The speaker's Bluetooth is already paired to
another device.
The user's 1. The user's device does not have Bluetooth
device will not enabled.
pair with the
2. The user's device may be out of range.
hood speakers.
3. The user's device is already paired to another
device.
4. There are multiple errors preventing the user's
device from pairing with the speaker's Bluetooth.
The user's 1. There is an error during the pairing process.
device is paired
with the hood
speakers, but
2. The user's device may be out of range.
will not connect
to the speakers.
3. There are multiple errors preventing the user's
device from pairing the speaker's Bluetooth.
The hood 1. The volume is too low.
speakers and
the user's device
2. The audio is muted.
are paired and
connected,
3. The sound on the user's device is not set as the
but there is no
default playback device.
audio.
Le volume 1. Une version Bluetooth® plus ancienne est utilisée
maximum par l'appareil.
reproduit par les
enceintes est
trop faible.
What to do
1. Press the Bluetooth button to signal the
pairing process.
2. Hold the Bluetooth button for a few seconds to
restart the pairing process.
3. Disable other Bluetooth devices within the
area.
4. Disconnect the speaker's Bluetooth from the
device.
1. Enable Bluetooth on the user's device.
2. Move closer towards the speakers.
3. Disconnect the Bluetooth device from the
user's device.
4. Restart the user's device.
1. Forget (remove) the speaker's Bluetooth
from the user's device and retry the pairing
process.
2. Move closer towards the speakers.
3. Restart the user's device.
1. Increase the volume from either the speakers
or the user's device.
2. Unmute the volume and increase it to a
moderate level.
3. Set the speakers as the default playback
device.
1. Augmentez le volume maximum en
augmentant le volume des haut-parleurs plutôt
que de l'appareil.
21