Zephyr Roma Groove ZRG-E30AS Guide D'utilisation, D'entretien Et D'installation page 23

®
BLUETOOTH SPEAKER TROUBLESHOOTING PROCEDURES
Issue Cause
The hood 1. The speaker's Bluetooth
speakers will with any devices.
not pair with the
user's device. 2. The speaker's Bluetooth
with devices, signaled by a sound indication.
3. There are competing devices attempting to pair
with the speakers.
4. The speaker's Bluetooth
another device.
The user's 1. The user's device does not have Bluetooth
device will not enabled.
pair with the
2. The user's device may be out of range.
hood speakers.
3. The user's device is already paired to another
device.
4. There are multiple errors preventing the
user's device from pairing with the speaker's
Bluetooth
The user's 1. There is an error during the pairing process.
device is paired
with the hood
speakers, but
2. The user's device may be out of range.
will not connect
to the speakers.
3. There are multiple errors preventing the user's
device from pairing the speaker's Bluetooth
The hood 1. The volume is too low.
speakers and
the user's device
2. The audio is muted.
are paired and
connected,
3. The sound on the user's device is not set as the
but there is no
default playback device.
audio.
The maximum 1. An older Bluetooth
volume played device.
from the
speakers is too
low.
®
is not actively pairing
®
has stopped pairing
®
is already paired to
®
.
®
version is being used by the
21
What to do
®
1. Press the Bluetooth
pairing process.
®
2. Hold the Bluetooth
to restart the pairing process.
3. Disable other Bluetooth
area.
4. Disconnect the speaker's Bluetooth
device.
® ®
1. Enable Bluetooth on the user's device.
2. Move closer towards the speakers.
3. Disconnect the Bluetooth
user's device.
4. Restart the user's device.
1. Forget (remove) the speaker's Bluetooth
from the user's device and retry the pairing
process.
2. Move closer towards the speakers.
3. Restart the user's device.
®
.
1. Increase the volume from either the speakers
or the user's device.
2. Unmute the volume and increase it to a
moderate level.
3. Set the speakers as the default playback
device.
1. Increase the maximum volume by increasing
the volume from the speakers rather than the
device.
button to signal the
button for a few seconds
®
devices within the
®
from the
®
device from the
®