Surface Maintenance; Cleaning Stainless Steel - Zephyr Tornado II AK8200AS Guide D'utilisation, D'entretien Et D'installation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SURFACE MAINTENANCE:

Do not use corrosive detergents, abrasive detergents or oven cleaners.
Do not use any product containing chlorine bleach or any product containing chloride.
Do not use steel wool or abrasive scrubbing pads which will scratch and damage surface.

Cleaning Stainless Steel

Clean periodically with warm soapy water and clean cotton cloth or micro fiber cloth. Always rub in the
direction of the stainless steel grain. To remove heavier grease build up use a liquid degreaser detergent.
After cleaning use a non-abrasive stainless steel polish/cleaners, to polish and buff out the stainless luster
and grain. Always scrub lightly, with clean cotton cloth or micro fiber cloth and buff in the direction of the
stainless steel grain.
Stainless Steel Baffle Filters
The stainless steel baffle filters are intended to trap residue and grease from cooking. Although the filters
should never need replacing, they are required to be cleaned every 30 days or more often depending on
cooking habits.
Filters may be placed in dishwasher at low heat or soaked in hot soapy water Dry filters and re-install before
using hood.
Installing Baffle FIlters, FIG 4:
1. Place filter into top groove of the power pack as shown and
pull towards front of power pack using handles.
2. Pivot back of filter upwards so it is angled in the power pack.
3. Push filter into channel on back of power pack to lock into place.
Replacing Baffle Filters:
Hood Model:
Part No.
AK8200AS
50210010
AK8300ASX
50210010
Qty. to Order
2
3
16
www.zephyronline.com
1
3
2
FIG 4

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Tornado iii ak8300asx

Table des Matières