Technical Data - WELDY booster EX2 Notice D'utilisation

Conformity
Weldy AG, Galileo-Strasse 10, 6056 Kaegiswil/Switzerland, confirms that this product, in the version as
brought into circulation through us, fulfils the requirements of the following EC directives.
Directives:
Harmonized Standards:
Kaegiswil, 09.07.2015
Disposal
Electrical equipment, accessories and packaging should be recycled in an environmentally friendly
way. For EU countries only: Do not dispose of electrical equipment with household refuse!

Technical Data

Voltage
Mains voltage is not reversible
Power consumption
Frequency
Air temperature
Plasticizer temperature
Emission level
Size L W H
without welding shoe
Weight
incl. 3 m cable
Conformity mark
Protection class II
Welding output
Welding rod mm
(in accordance with DVS 2211)
3; Welding output [ kg/h ]
(Average values at 50 Hz)
4; Welding output [ kg/h ]
(Average values at 50 Hz)
Technical data and specifications are subjected to change without prior notice.
11
2006/42,
2004/108 (until 19.04.2016), 2014/30 (starting 20.04.2016),
2011/65
EN 12100, EN 55014-1, EN 55014-2, EN 61000-6-2, EN 61000-3-2, EN 61000-3-3,
EN 62233, EN 60335-1, EN 60335-2-45, EN 50581
Bruno von Wyl, CTO
V~
W
Hz
°C
°C
LpA (dB)
mm
kg
Peter Kathriner, GM
booster EX2
230
3000
50 / 60
max. 360
max. 310
74
500 140 430
6.4
booster EX2
3 / 4
PE 1.5 PP 1.5
PE 2.2 PP 2.2
booster EX3
230
3000
50 / 60
max. 360
max. 310
74
630 140 430
6.9
booster EX3
3 / 4
PE 2.4 PP 2.4
PE 3.4 PP 3.4