Control Lock - Dimplex Revillusion RBF24DLX Manuel D'utilisation

Operation
Icon Function
J
Heat Mode
K
Temp Up
Change Fahrenheit
( F) to Celsius (
°
Heat Enable
Heat Disable
L
Heat

Control Lock

Control Unlock
Description
Press the mutiple time to toggle through the heat
modes (Normal, Eco and Boost). Normal is indicated
with a Nor on the displacy, ECO is indicate by an
Eco on the display and Boost is indicate by a b20
on the display. In boost mode, a time is set initial for
20 minutes and the display will indicate b19, b18, etc
as the time counts down. This is shown by pressing
the heat mode button.
Press multiple time to raise the heater temperature in
1 F (1
°
highest temperature is 99
active whenever the heat is enabled.
Press both Temp+ (
C)
° time on the touch panel controls.
Hold both Heat (
panel controls for 2 seconds. Temperature displays on
the screen.
Hold both Heat (
panel controls for 2 seconds, when temperature is
adjusted "---" displays on the screen.
• Heat On
Press to turn heat On (indicated by 1 short beep and
the icon appearing on the display). Displays current
heater temperature setting. Use the Temp Up/Down
icon to change the heater temperature setting.
• Heat Off
Press to turn heat Off (indicated by 1 short beep).
!
NOTE: After the heater is switched off, the fan will
continue on for 60 seconds before turning off.
Hold both Temp– (
unit, for 2 seconds to disable the touch panel controls.
Hold both Temp– (
unit, for 2 seconds to enable the touch panel controls.
C) increments. Displays current temperature;
°
) and Temp– (
) and Temp– (
) and Brightness (
) and Brightness (
F (37 C). This feature is
° °
) and Temp– (
) on the touch
) on the touch
) at the same
), on the
), on the
19