Dust Extraction; Attachments And Accessories - Bosch GBH18V-34CQ Consignes D'utilisation/De Sécurité

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

For selection of dust collection systems
and operating instructions, see the
Operating / Safety Instructions for 'Dust
Extraction Attachments for Hammers
Service
Preventive maintenance performed by
un au thorized personnel may result in
misplacing of internal wires and
components which could cause serious
hazard. We recom mend that all tool
service be performed by a Bosch
Factory Service Center or Authorized
Bosch Service Station. SERVICE MEN:
Disconnect battery pack from the tool
before servicing.
Batteries
Be alert for battery packs that are
nearing their end of life. If you notice
decreased
significantly shorter running time
between charges then it is time to
replace the battery pack. Failure to do
so can cause the tool to operate
improperly or damage the charger.
Tool Lubrication
Your Bosch tool has been properly
lubricated and is ready for use.
specified in this manual may create a hazard.
Store accessories in a dry and temperate environment to avoid corrosion and
deterioration.
- 360˚ Auxiliary Handle

Dust Extraction

To avoid accidents, always disconnect the battery pack from tool
before servicing or cleaning.
NO USER SERVICE -
ABLE PARTS INSIDE.
tool
performance

Attachments and Accessories

Only use attachments or accessories specified in this instruction
The use of any other attachments or acces so ries not
manual.
Included
and Hammer Drills' included with your
tool or with the dust extraction
attachment.
Maintenance
Motors
The motor in your tool has been
engineered
dependable service. To maintain peak
efficiency of the motor, we recommend
it be examined every six months by a
Bosch Factory Service Center or
Authorized Bosch Service Station.
Cleaning
damage plastic parts. Some of these
are: gasoline, car bon tetrachloride,
chlorinated cleaning solvents, ammonia
and household detergents that contain
ammonia.
or
Ventilation openings and switch levers
must be kept clean and free of foreign
matter. Do not attempt to clean by
inserting pointed objects through
opening.
- Connectivity module
- 3-jaw chuck
-18-
for
many
Certain
agents and solvents
Sold Separately
hours
of
cleaning

Publicité

Table des Matières
loading

Table des Matières