Panasonic MULTI CF-VDM741U Instructions D'utilisation page 19

<Only for CF-74 series>
Use "B's Recorder" and "B's CLiP" preinstalled in the computer.
<Only for CF-51 series>
Install "B's Recorder" and "B's CLiP" using "DVD Drive Utility Disc" (included). (
below)
<Only for CF-51 Series>
Installing B's Recorder / B's CLiP
NOTE
"B's Recorder" and "B's CLiP" may have already been installed at the time of ship-
ment from the factory. Be sure to uninstall them (
tion according to the steps given below.
1 Log on to Windows as an administrator.
2 Set "DVD Drive Utility Disc" in the drive (
step 2 ).
3 Click [B's Recorder Gold/B's CLiP Setup].
4 Click [B's Recorder GOLD8 BASIC] and follow the on-screen instructions.
During the course of the installation process, you will be asked to input a serial number.
Input the serial number (B's Recorder GOLD8: ).
5 Upon completion of the installation, click [Yes, I want to restart my computer now],
then click [Finish].
The computer will restart automatically.
6 Log on to Windows as an administrator.
7 Input [x:\setuputil.exe]
[Utility Setup tool] screen will appear.
1
* "x" is the drive letter. You can change the letter to suit your preference.
8 Click [B's Recorder Gold/B's CLiP Setup].
9 Click [B's CLiP6] and follow the on-screen instructions.
During the course of the installation process, you will be asked to input a serial number.
Input the serial number (B's CLiP6: ).
10 Upon completion of the installation, click [Yes, I want to restart my computer now],
then click [Finish].
The computer will restart automatically.
*
1
in [start] - [Run] and click [OK].
page 13) and perform installa-
page 14 "Installing DVD-RAM Driver"
E
19